Tektronix DG2030 User Manual page 136

DG2030 User Manual
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Before
Execution
Moved Left by 1 Point
After
Execution
Editing Area
Figure 3 32: Shift left
Before
Execution
Hold the Level of the Left Edge
Moved Right by 1 Point
After
Execution
Editing Area
Figure 3 33: Shift right
If a shifting operation is selected when the Select arrow key function item is
selected in the Settings menu, data can be shifted to the left or right with the
arrow buttons.
Table and Binary. In the table and binary displays you can shift data using any of
the following:
H Shift up (add zero)
H Shift down (add zero)
H Shift up
H Shift down
The cursor becomes the area cursor. The data inside the editing area is shifted
one point up or down. Data that overflows the edit area is lost. If you select any
one of the add zero selections, zeros are added to the top or bottom. If you select
shifting without adding zeros, values added at the top or bottom are equal to the
top or bottom-most values for each bit in the edit area when shifting started.
If a shifting operation is selected when the Select arrow key function item is
selected in the Settings menu, data can be shifted up or down with the arrow
buttons.
Hold the Level of
the Right Edge
Edit Menu
3 39