Marking Unit; General - ABB FlexMT Product Manual

3.8 Marking unit

3.8.1 General

The marking unit is a standard FlexMT option. The hardware consists of a SIC
marking equipment, i.e. an i52 marking head with an E10 controller unit.
During operation, the robot communicates by means of serial communication with
the controller unit. The robot must thus be equipped with the serial communication
option.
For in-depth information refer to the section on pre-configuration data.
3HAC051768-001 Revision: -
© Copyright 2014-2014 ABB. All rights reserved.
3 Commissioning
3.8.1 General
75