Machine Tool Functional Interface - ABB FlexMT Product Manual

2.5.2 Machine tool functional interface

The functional interface can communicate by means of any available physical
interface. The FlexMT standard configuration includes:
The functional interface must be configured and commissioned prior to use of the
FlexMT. Please refer to the section Commissioning for details on functional interface
setup.
3HAC051768-001 Revision: -
• Digital 24V I/O interface with 16 IN and 16 OUT signals to be connected to
the machine tool.
• Digital I/O is working with the machine tools 24V.
• Other physical interfaces are available by using optional IRC5 field bus or
interface options (to be ordered with robot).
© Copyright 2014-2014 ABB. All rights reserved.
2 Installation
2.5.2 Machine tool functional interface
51