Packing And Transport; Goods Marking; Documents; Transport And Lifting - ABB OVR-15 Instruction, Operation And Maintenance Manual

I N T R O D U C T I O N , PA C K I N G A N D T R A N S P O R T
—

2 Packing and transport

—

2.1 Goods marking

01 General symbols
on packing case
The factory-assembled LV cabinet is transported
—
in a different packing case than its mounting
02 Packing case
lifting arrangement
brackets. Each case is marked on two sides with
indelible black ink. Case markings include
information such as case number, gross weight, etc.
In addition to the above, the cases are marked with
the following symbols. These should be observed
when choosing lifting equipment.
—
01

2.2 Documents

Documents provided with the LV unit during
dispatch include:
• Instruction manual
• Operator's quick reference guide
• Routine test certificate
• Drawings
• Packing list
• Other documents as mutually agreed in contract
with ABB

2.3 Transport and lifting

The LV cabinet shall be transported in packed
condition only. Before lifting the case, observe the
information on it (such as symbol, weight, etc.).
The following precautions are to be taken during
lifting:
• Ensure that packing cases are not placed on wet
surfaces/waterlogged areas.
• LV cabinets should not be stacked on top
of one another.
• The LV cabinet should be lifted by a lifting device
equipped with forks or slings. If a crane is used,
slings shall be used. The units must not be rolled
or dropped.
—
02
7