Emergency And Safemove Stop; Emergency Stop - ABB FlexMT Product Manual

6.4 Emergency and SafeMove stop

6.4.1 Emergency stop

Press any emergency stop button to stop the entire robot cell.
Emergency stop must only be used in emergency situations and not to stop the
machine normally. The robot cell stops as quickly as possible and
unwanted/unexpected situations can occur where there may be a risk when
restarting the robot cell without manual intervention.
Please note: Grippers will remain pressurized.
3HAC051768-001 Revision: -
© Copyright 2014-2014 ABB. All rights reserved.
6 Operation
6.4.1 Emergency stop
121