2.2.3 Unpacking and positioning
Start unpacking by removing all the stretch film. Remove all the transport safety
and all the bolts from the pallet.
The FlexMT can be lifted using a fork lift with the provided fork lift slots, placed on
the bottom of the machine.
Lift of the FlexMT using fork lift
3HAC051768-001 Revision: -
Note
Check all delivered parts for unexpected damage. If necessary, take appropriate
actions.
© Copyright 2014-2014 ABB. All rights reserved.
2 Installation
2.2.3 Unpacking and positioning
Continues on next page
29