Packing And Transport; Goods Marking; Documents; Transport And Lifting - ABB OVR-15 Instruction, Operation And Maintenance Manual

I N T R O D U C T I O N , PA C K I N G A N D T R A N S P O R T
—

2 Packing and transport

—

2.1 Goods marking

01 General symbols
on packing case
The recloser is transported in "Contact OPEN"
—
position. The HV unit of the factory-assembled
02 Packing case
lifting arrangement
recloser may be transported in a different packing
case than the LV unit and mounting brackets.
Each case is marked on two sides with indelible
black ink. Case markings include information
such as case number, gross weight, etc.
Optional accessories, such as auxiliary power
voltage transformer, terminal connectors, etc.,
may also be transported in a separate case.
In addition to the above, the cases are marked with
the following symbols. These should be observed
when choosing lifting equipment.
—
01

2.2 Documents

Documents provided with the recloser during
dispatch include:
• Instruction manual
• Routine test certificate
• Drawings
• Packing list
• Other documents as mutually agreed in contract
with ABB

2.3 Transport and lifting

The recloser must be transported in packed
condition only. Before lifting the case, observe the
information on it (such as symbols, weight, etc.).
The following precautions are to be taken during
lifting:
• Ensure that packing cases are not placed
on wet surfaces/waterlogged areas.
• Reclosers should not be stacked on top
of one another.
• Reclosers should be lifted by a lifting device
equipped with forks or slings. If a crane is used,
slings must be used. The units must not be rolled
or dropped.
—
02
7