Compressed Air Lubricator - ABB FlexMT Product Manual

7.5.3 Compressed air lubricator

What: If a deburring/grinding unit is used the FlexMT is equipped with a lubricator
placed in front of the air cleaning unit.
When: Depending on usage of the deburring/grinding unit. Typical 1 time/week.
How: The lubricator is placed in front of the air cleaning box. It has an inspection
window where the oil level is visible. If oil level is below the minimum level mark
refill it by pulling the blue button down and turn the bowl clockwise until it is loose.
Refill with a suitable oil so the oil level is above minimum level. Recommended oil
is Festo special oil as per ISO VG 32 (type Festo OFSW-32)
3HAC051768-001 Revision: -
© Copyright 2014-2014 ABB. All rights reserved.
7 Maintenance
7.5.3 Compressed air lubricator
157