Other Maintenance; Marking Unit - ABB FlexMT Product Manual

7 Maintenance

7.7.1 Marking unit

7.7 Other maintenance

7.7.1 Marking unit
What: Clean the stylus pin guide and the stylus assembly regularly.
When: Depends on amount of dust and dirt in the cell. Every month.
How: Unplug the marking machine. Unscrew the stylus pin guide (see marking unit
manual). Remove the stylus, the spring and the core. Clean all parts and remove
the grease. Lubricate the stylus and the stylus pin guide using the oil supplied with
the marking unit. Reassemble the machine and manually fasten the stylus pin
guide. Note : please pay attention to the direction when reassembling the core
(see marking unit manual). Avoid dust and abrasive particles on the guiding and
driving elements.
160
© Copyright 2014-2014 ABB. All rights reserved.
3HAC051768-001 Revision: -