Safety During Installation, Commissioning And Decommissioning - ABB FlexMT Product Manual

1 Safety

1.3 Safety during installation, commissioning and decommissioning

1.3 Safety during installation, commissioning and decommissioning
Carefully read the safety precautions, before unpacking and installing the
equipment.
Personnel who are involved in the installation and commissioning must have
relevant training for the respective robot and corresponding safety issues.
If the FlexMT is equipped with the turn station option, an additional safety precaution
might be necessary. Depending on the length of parts to be turned, an additional
protective shield might become necessary.
16
WARNING
It is forbidden to step on the part of the conveyors that is outside of the
machineEnsure that nobody is on the conveyor, especially when the belt is in
motion.
WARNING
It is forbidden to step on the illumination roof, the outer walls of the FlexMT and
on any FlexMT option.
DANGER
Ensure that nobody is within the machine enclosure during operation.
DANGER
When using the turn station option, perform a complementary risk analysis with
respect to the length of the part and height of the risk zone. See section on
mechanical installation.
DANGER
The SafeMove configuration shall not be disabled for any reason.
© Copyright 2014-2014 ABB. All rights reserved.
3HAC051768-001 Revision: -