Further Integration Steps - ABB FlexMT Product Manual

3.5.3 Further integration steps

The pre-configured robot software for FlexMT contains suggestions for a working
application skeleton.
If pre-installation and pre-configuration data of the robot system should get lost
for any reason, you can find a primary backup on the PickMT system harddisk.
Refer to the repair section for detailed information.
3HAC051768-001 Revision: -
Note
Please follow suggestions in the section about robot program for building your
own applications. Further in-depth reading of the PickMT manual with its section
on robot integration and FeedLine Light is strongly recommended.
• Immediately after initial commissioning, start maintaining your own system
backups.
© Copyright 2014-2014 ABB. All rights reserved.
3 Commissioning
3.5.3 Further integration steps
71