Illumination - ABB FlexMT Product Manual

8 Repair

8.3 Illumination

8.3 Illumination
Exchange of fluorescent tubes is described in the maintenance section.
In rare cases, the complete luminaires have to be exchanged. Use the following
procedure:
Layout of luminaires and smart camera
170
DANGER
Prior to work with the illumination: Safely shut the power to the FlexMT down
and lock against accidental turn-on.
• Identify the defect luminaires.
• Remove the fluorescent tube and the reflector.
• Remove the inner protection housing.
• Loosen the power cables.
• Remove the luminaires.
• Replace by the new luminaires and assemble in reverse order.
© Copyright 2014-2014 ABB. All rights reserved.
3HAC051768-001 Revision: -