View And Change Parameters - ABB FlexMT Product Manual

13.2.4 View and change parameters

Step
1
2
3
4
5
6
7
3HAC051768-001 Revision: -
Action
Go to the Main menu by pressing
are in the output mode, otherwise by press-
ing repeatedly until you see MENU at
the bottom.
If the panel is not in the Parameter mode
("PAr" not visible), press key
until you see "PAr" and then press
The display shows the number of one of the
parameter groups.
Use keys and
parameter group.
Press . The display shows one of the para-
meters in the selected group.
Use keys and
parameter.
Press and hold for about two seconds
until the display shows the value of the
parameter with underneath indicating
that changing of the value is now possible.
Note: When is visible, pressing keys
and simultaneously changes the
displayed value to the default value of the
parameter.
Use keys and
parameter value. When you have changed
the parameter value,
• To save the displayed parameter value,
press
• To cancel the new value and keep the ori-
ginal, press .
© Copyright 2014-2014 ABB. All rights reserved.
13 Appendix A: Configuration
13.2.4 View and change parameters
Display
if you
or
.
to find the desired
to find the desired
to modify the
starts flashing.
215