Assemble Corridor Parts - ABB FlexMT Product Manual

2 Installation

2.2.4 Assemble corridor parts

2.2.4 Assemble corridor parts
Adjust width of opening towards machine tool
The width of the opening towards the machine tool can be adjusted according to
the actual needs. By selecting a suitable amount of the flexible panels on the back
side of the FlexMT, various opening widths can be achieved (850mm, 1300mm,
1500mm):
Variable opening towards machine tool: 850 mm
Variable opening towards machine tool: 1300 mm
Continues on next page
32
© Copyright 2014-2014 ABB. All rights reserved.
3HAC051768-001 Revision: -