Install Flexmt Drop Protection - ABB FlexMT Product Manual

2 Installation

2.2.7 Install FlexMT drop protection

2.2.7 Install FlexMT drop protection
After putting the FlexMT in position and securing it in place, the drop protection
plates shall be put into position. Start with putting the main part A into position and
secure it to the FlexMT frame.
Thereafter, hook the corridor part (B) into the main part and secure it.
FlexMT drop protection with main part (A) and corridor part (B)
42
© Copyright 2014-2014 ABB. All rights reserved.
3HAC051768-001 Revision: -