Unloading - ABB FlexMT Product Manual

2.2.2 Unloading

The FlexMT weight is 2500kg and shall be lifted off the transporter with a forklift
from the side. On the wooden pallet there are signs where to lift. The FlexMT can
be transported on the workshop floor with a forklift from the side, with 3 handheld
lifts as the pictures show, or on appropriate skates.
Initial transport of the unit using handheld lifts (1). Look for fork lift signs
3HAC051768-001 Revision: -
DANGER
All lifting devices must be properly dimensioned.FlexMT weight is 2500kg
CAUTION
When transporting using a forklift truck, moving parts on or in the FlexMT must
not be touched or damaged. The equipment must be lowered slowly. Knocks,
shaking and drops can cause deformations
DANGER
Never go beneath a suspended load.
© Copyright 2014-2014 ABB. All rights reserved.
2 Installation
2.2.2 Unloading
Continues on next page
27