Continuing Work In Automatic Mode After Manual Mode Operation - ABB FlexMT Product Manual

6.7.1.2 Continuing work in automatic mode after manual mode operation

3HAC051768-001 Revision: -
6.7.1.2 Continuing work in automatic mode after manual mode operation
• Save the robot program if changes have been made.
• Close fences and reset safety circuits.
• Set the robot operating mode to automatic.
• Acknowledge the message on the FlexPendant.
• Press "Motors on" on the robot operation panel
• Press Start on the FlexPendant.
© Copyright 2014-2014 ABB. All rights reserved.
6 Operation
133