ABB FlexMT Product Manual page 168

8 Repair
8.2.1 Exchange of conveyor belt
Continued
The belt path should be as indicated in picture.
168
• Adjust belt tension according to instructions in the maintenance section.
DANGER
Power to the FlexMT has to be restored prior to mounting the protection caps,
in order to perform the belt adjustment. Be careful when adjusting the belt. Risk
for finger squeeze.
• Adjust belt side position and stability according to instructions in the
maintenance section.
• Mount the protection cover.
© Copyright 2014-2014 ABB. All rights reserved.
3HAC051768-001 Revision: -