Illumination - ABB FlexMT Product Manual

7.4.2 Illumination

What: Fluorescent lamp
When: When the fluorescent lamps are coming towards the end of their service
life, and when the first fluorescent lamp stops working, all the remaining ones must
be replaced at the same time.
How: Turn the fluorescent lamp a ¼ turn until the contact grooves are free.
If only one lamp stops working after a maximum of six months, it is enough to only
replace that particular lamp.
3HAC051768-001 Revision: -
© Copyright 2014-2014 ABB. All rights reserved.
7 Maintenance
7.4.2 Illumination
149