Pneumatic Maintenance; Air Preparation Condensate Drain - ABB FlexMT Product Manual

7 Maintenance

7.5.1 Air preparation condensate drain

7.5 Pneumatic maintenance

7.5.1 Air preparation condensate drain
What: Condensate drain.
When: When condensate level is approx. 10 mm below the filter element.
How: Turn the drainage screw at the bottom of the bowl in an anticlockwise direction
as seen from below. The condensate will then flow out.
When: Depending on quality of the compressed air, generally 1-2 times/year.
How: For further cleaning pull the blue button downwards and turn the bowl
clockwise until it is loose. See figures below. Replace the filter and clean the bowl.
Assemble in reverse order.
154
© Copyright 2014-2014 ABB. All rights reserved.
3HAC051768-001 Revision: -