Table of Contents
Advertisement
4.2.2 Sensors
The main sensors the FlexMT can be equipped with are:
Schematic overview with sensors (1)
Schematic overview with sensors (2)
3HAC051768-001 Revision: -
•
A Sensor that detects if a part has been placed on the statistical outlet.
•
B Safety sensor that ensures that statistical outlet is closed when the robot
moves inside this area.
•
C Inconveyor TooFar-sensor, detects if parts on the inconveyor have been
transported to far. This is usually due to unidentified parts.
•
D Inconveyor InPosition-sensor, detects that a part has been transported
into the cameras field of view.
•
A Outconveyor ToFarOutbelt-sensor, detects when a part arrives at the end
of the outconveyor.
© Copyright 2014-2014 ABB. All rights reserved.
4 Function description
4.2.2 Sensors
83
Advertisement
Table of Contents
Troubleshooting
