Operation - ABB FlexMT Product Manual

6 Operation

The FlexMT:s work place during operation is at the beginning of the inconveyor,
where the operator adds new material and unloads the outconveyor. For "Teachin"
there is a work place in front of FlexMT, at the vision system screen location.
The inconveyor has two operation modes.
In manual operation mode, the inconveyor can be run forward and backward
manually. In the automatic operation position the inconveyor is run forward
automatically when there are no more parts in the picking area. If the inconveyor
is not refilled in time, the conveyor stops after a set monitoring period.
The outconveyor has two operation modes.
In automatic operation mode, the conveyor is controlled by the robot. The
outconveyor is moved forward at need, until details arrive at the end of the belt.
In manual (emptying) mode, the outconveyor moves forward until parts are detected
at the end of the conveyor.
3HAC051768-001 Revision: -
WARNING
The machine may only be operated by trained operators with the required
knowledge of the FlexMT:s functions and risks.
© Copyright 2014-2014 ABB. All rights reserved.
6 Operation
Continues on next page
113