ABB FlexMT Product Manual page 41

The image below shows the FlexMT from below, pointing out the 4 machine foot
positions (A) and the 4 bolting positions (B).
FlexMT from below. A: Adjustable machine foot, B: Bolted to the floor.
3HAC051768-001 Revision: -
Note
Note that a tightening torque of ~300 Nm / 220 lb ft is required to ensure that the
equipment is well secured.
© Copyright 2014-2014 ABB. All rights reserved.
2 Installation
2.2.6 Install the FlexMT to the machine
Continued
41