ABB FlexMT Product Manual page 212

13 Appendix A: Configuration
13.2.2.1 Key functions
Continued
4. Up
5. Down
6. LOC/REM – Changes between local and remote control of the drive.
7. DIR – Changes the direction of the motor rotation.
8. STOP – Stops the drive in local control.
9. START – Starts the drive in local control.
212
• Scrolls up through a menu or list.
• Increases a value if a parameter is selected.
• Increases the reference value in the Reference mode.
• Holding the key down changes the value faster.
• Scrolls down through a menu or list.
• Decreases a value if a parameter is selected.
• Decreases the reference value in the Reference mode.
• Holding the key down changes the value faster.
© Copyright 2014-2014 ABB. All rights reserved.
3HAC051768-001 Revision: -