Switch Settings; Station Number Setting (Master Station, Remote I/O Stations And Remote Device Stations) - Mitsubishi FX2N-16CCL-M User Manual

FX2N-16CCL-M CC-Link System Master Block
8.6

Switch Settings

This section describes the setting method of each switch in the modules.
8.6.1

Station number setting (master station, remote I/O stations and remote device stations)

This section describes the method to set the station number of the master station, remote I/O
stations and remote device stations.
Align the settings with the contents stored in the parameter information area "station
information (addresses 20
1) Set the station numbers to be consecutive.
The station number can be set without regard to the connection order.
For a module occupying 2 or more stations, set the head station number.
Table 8.3:
Station type
Master station
Remote I/O station
Remote device station
Setting example: When setting the station numbers in the connection order
Station No. 0
Master
station
(fixed)
Point
to 2E
H
Station number to be set
Station No. 0
Master
station
Station No. 1
➀
Remote I/O station
(occupies 1 station)
Station No. 1 Station No. 2 Station No. 3 Station No. 4 Station No. 5 Station No. 6 Station No. 7 Station No. 8 Station No. 9
➀ ➁
Remote I/O Remote I/O
station station
)" in the buffer memory.
H
0 (fixed)
1 to 15
Station No. 2
➁
Remote I/O station
(occupies 1 station)
➂
Remote device station
Data Link Procedure 8
Station No. 3 Station No. 7
➂ ➃
Remote Remote
device station device station
(occupies 4 (occupies 2
stations) stations)
➃
Remote device station
8-12