Switch Setting - Mitsubishi MELSEC-L Series User Manual

7.2

Switch Setting

Set the operation mode and the input range used in each CH.
(1) Setting procedure
Set from "Switch Setting" in the project window.
Project window
Item
Input Range Setting
Operation Mode Setting Set the operation mode of the A/D converter module.
40
[Intelligent Function Module]
Description
Set the input range used in each CH.
module name "Switch Setting"
Setting value
• 4 to 20mA (default value)
• 0 to 20mA
• 1 to 5V
• 0 to 5V
• -10 to 10V
• 0 to 10V
• User range setting
• Normal mode (default value)
• Offset/gain setting mode