Creating A Network Architecture; Deploying Nodes - Delta AH500 Hardware Operation Manual

A H 5 0 0 H a r d w a r e a n d O p e r a t i o n M a n u a l

9.2 Creating a Network Architecture

9.2.1 Deploying Nodes

After users open the NWCONFIG window for projects for the first time, the devices for which the projects are
created will be deployed in the working area in the NWCONFIG window. If the devices deployed in the working
area include AH500 series CPU modules, the modules connected to the CPU modules, the parameters in the
CPU modules, and the parameters in the modules connected to the CPU modules will be displayed according
to the setting in HWCONFIG. The devices deployed in the working area can not be changed or deleted.
The users can add other PLCs or devices to the working area. There are two ways to add a new device to the
working area.

Method 1
Select a PLC or a device on the device list. After the users double-click the PLC or the device, the PLC or
the device will be put at the right side of the rightmost device in the working area.
9 - 1 2