Delta AH500 Hardware Operation Manual page 534

g. Once the download is complete, you can see the newly added table to be monitored under the Data
Monitor node.
h. Note: The data monitor table must be downloaded to the device otherwise even if the data monitor
table is created, it cannot be monitored.
11.4.6.2 Data Monitor Table Pages
The setting results are shown as below.
Item
Table name
Monitor status
Update cycle
"-"
"+"
Name of the table; read only
Status of the monitoring; read only
Yellow light: reading, Green light: reading complete, Red light: reading
error
Update cycle time; default is what you set up in data monitor setup page;
unit: second
Minus; click once to decrease 1; the minimum value is 1
Plus; click once to increase 1; the maximum value is 60
C h a p t e r 11 C o n v e n i e n t F u n c t i o n s
Description
11 - 8 5