Delta AH500 Hardware Operation Manual page 595

A H 5 0 0 H a r d w a r e a n d O p e r a t i o n M a n u a l
Error
Description
code
The signal received by channel 0
exceeds the range of inputs
16#A400 which can be received by the
hardware. (The ERROR LED
indicator is ON.)
The signal received by channel 1
exceeds the range of inputs
16#A401 which can be received by the
hardware. (The ERROR LED
indicator is ON.)
The signal received by channel 2
exceeds the range of inputs
16#A402 which can be received by the
hardware. (The ERROR LED
indicator is ON.)
The signal received by channel 3
exceeds the range of inputs
16#A403 which can be received by the
hardware. (The ERROR LED
indicator is ON.)
The signal received by channel 4
exceeds the range of inputs
16#A404 which can be received by the
hardware. (The ERROR LED
indicator is ON.)
The signal received by channel 5
exceeds the range of inputs
16#A405 which can be received by the
hardware. (The ERROR LED
indicator is ON.)
The signal received by channel 6
exceeds the range of inputs
16#A406 which can be received by the
hardware. (The ERROR LED
indicator is ON.)
The signal received by channel 7
exceeds the range of inputs
16#A407 which can be received by the
hardware. (The ERROR LED
indicator is ON.)
16#A600 Hardware failure
16#A601 The external voltage is abnormal.
Internal error
16#A602
The CJC is abnormal.
Internal error
16#A603 The factory correction is
abnormal.
The signal received by channel 0
exceeds the range of inputs
16#A800 which can be received by the
hardware. (The ERROR LED
indicator is OFF.)
1 2 - 4 6
Remedy
Check the module parameter in HWCONFIG.
Check whether the signal received by channel 0 exceeds
the range of inputs which can be received by the
hardware.
Check the module parameter in HWCONFIG.
Check whether the signal received by channel 1 exceeds
the range of inputs which can be received by the
hardware.
Check the module parameter in HWCONFIG.
Check whether the signal received by channel 2 exceeds
the range of inputs which can be received by the
hardware.
Check the module parameter in HWCONFIG.
Check whether the signal received by channel 3 exceeds
the range of inputs which can be received by the
hardware.
Check the module parameter in HWCONFIG.
Check whether the signal received by channel 4 exceeds
the range of inputs which can be received by the
hardware.
Check the module parameter in HWCONFIG.
Check whether the signal received by channel 5 exceeds
the range of inputs which can be received by the
hardware.
Check the module parameter in HWCONFIG.
Check whether the signal received by channel 6 exceeds
the range of inputs which can be received by the
hardware.
Check the module parameter in HWCONFIG.
Check whether the signal received by channel 7 exceeds
the range of inputs which can be received by the
hardware.
1. Check whether the backplane is normal.
2. Check whether the module operate normally.
Check whether the external 24 V power supply to the
module is normal.
Please contact the local authorized distributors.
Please contact the local authorized distributors.
Check the module parameter in HWCONFIG.
Check whether the signal received by channel 0 exceeds
the range of inputs which can be received by the
hardware.