Delta AH500 Hardware Operation Manual page 583

A H 5 0 0 H a r d w a r e a n d O p e r a t i o n M a n u a l
A CPU parameter downloaded is
16#823C incorrect. A UDP socket is set
incorrectly.
A CPU parameter downloaded is
incorrect. The web function is set
16#823E
incorrectly.
A CPU parameter downloaded is
incorrect. The data exchange by
16#8240
means of Ethernet is set
incorrectly
The setting of a DNS server is
16#8241
incorrect.
A module configuration is being
16#8522
scanned.
16#853B An I/O module is not configured.
16#853C An I/O module does not exist.
16#854B An I/O module is not configured.
16#854C An I/O module does not exist.
The checksum of the module
16#8572
configuration table is incorrect.
The checksum of the module
16#8576
parameter setting is incorrect.
The checksum of the module
16#857A parameter mapping table is
incorrect.
An I/O interrupt number is
16#85E1
incorrect.
IAn I/O interrupt service routine
16#85E2
does not exist.
16#860F System restoration error
No memory card exists, or the
16#8611
memory card format is incorrect.
An error occurs when data is
accessed from the memory card,
16#8612
or the memory card is in read-only
mode.
16#8F03 A node number is undefined.
1 2 - 3 4
1. Check the Ethernet parameters for the CPU module
in HWCONFIG.
2. Check whether the version of HWCONFIG is
compatible with the version of the CPU module.
1. Check the Ethernet parameters for the CPU module
in HWCONFIG.
2. Check whether the version of HWCONFIG is
compatible with the version of the CPU module.
Modify the setting, and download it again.
Modify the setting, and download it again.
The module configuration is being scanned.
Check whether the module configuration in HWCONFIG
is correct.
Check whether the module configuration in HWCONFIG
is correct.
Check whether the module configuration in HWCONFIG
is correct.
Check whether the module configuration in HWCONFIG
is correct.
Please check the version of the firmware installed on the
CPU module and the version of ISPSoft, and contact the
local authorized distributors.
Please check the version of the firmware installed on the
CPU module and the version of ISPSoft, and contact the
local authorized distributors.
Please check the version of the firmware installed on the
CPU module and the version of ISPSoft, and contact the
local authorized distributors.
Please check the version of the firmware installed on the
CPU module and the version of ISPSoft, and contact the
local authorized distributors.
Check whether the corresponding interrupt service
routine is downloaded to the CPU module.
1. The contents of the system backup file are incorrect,
or the file does not exist in the path specified.
2. If the file exists and the procedure of restoring the
system can not be executed, please backing up the
system again.
3. If the error still occurs, please contact the local
authorized distributors.
No memory card is detected. Please format the memory
card, and try again.
Please make sure that the memory card is not in
read-only mode, and try again.
Modify the instruction and the network parameters, and
download them again.