Delta AH500 Hardware Operation Manual page 535

A H 5 0 0 H a r d w a r e a n d O p e r a t i o n M a n u a l
Item
Floating format setting
Device
Radix
Description
Status
Value
"On" / "Off"
Set Value
"Set"
11 - 8 6
Floating point setting; round down; default: round the number down to
three decimal places
Devices to be monitored; read only
Positional numeral system to be shown on the monitoring page; available
formats are Signed decimal, Unsigned decimal, Hexadecimal, Octal,
Binary, 32bit Signed decimal, 32bit Unsigned decimal, 32bit
Hexadecimal, 32bit Octal, 32bit Binary, 32bit Float and 64bit Double
Add a description here for the table; read only
Status of bit; read only
Green LED: ON; No LED: OFF
Values in devices to be monitored; read only
Signed decimal: K+ Number
Unsigned decimal: K+ Number
Hexadecimal: H + hex Number
Octal: O + octal Number
Binary: B + binary Number
32bit Signed decimal: K+ Number
32bit Unsigned decimal: K+ Number
32bit Hexadecimal: H + hex Number
32bit Octal: O + octal Number
32bit Binary: B + binary Number
32bit Float: float Number
64bit Double: float Number
"ON": the status of Bit is ON.
"OFF": the status of Bit is OFF.

If the authority level for the logged in user is READ, this column is
read only.
Change the value for the device to be monitored

Type the value in and click "SET" and the changed value appears in
the VALUE column as the image shown above.

If the authority level for the logged in user is READ, this column is
read only.
Click "Set" to confirm the changed value.

If the authority level for the logged in user is READ, this column is
read only.
Description