Delta AH500 Hardware Operation Manual page 598

Error
Description
code
The linear accumulation in
16#A031
channel 3 exceeds the range.
The scale set for channel
16#A032
3exceeds the range.
The number of cycles set for
16#A033
channel 3 exceeds the range.
The comparison value set for
16#A034
channel 3 exceeds the range.
A limit value set for channel 3 is
16#A035
incorrect.
The interrupt number set for
16#A036
channel 3 exceeds the range.
C h a p t e r 1 2 Tr o u b l e s h o o t i n g
Remedy
To clear the linear accumulation, users need to set bit 1 in
CR84 to ON by means of FROM/TO.
Check the module parameter in HWCONFIG.
The scale set for channel 3 should be in the range of 0 to
32767.
Check the module parameter in HWCONFIG.
The number of cycles set for channel 3 should be in the
range of 2 to 60.
Check the module parameter in HWCONFIG.
The comparison value set for channel 3 should be in the
range of -999999999 to 999999999.
Check the module parameter in HWCONFIG.
A limit value of set for channel 3 should be in the range of
-200000 to 200000.
Check the module parameter in HWCONFIG.
The interrupt number set for channel 3 should be in the
range of 0 to 31.
1 2 - 4 9