Delta AH500 Hardware Operation Manual page 178

2. Tighten the two screws in the holes indicated by b.

Installing a DIN rail
1. The installation is applicable to a 35 millimeter DIN rail.
2. Install the mounting clips on a backplane.
3. Install the backplane on a DIN rail.
Step 1: Pull the clasp in the direction indicated by the arrow.
Step 2: Hang the backplane on a DIN rail.
Step 3: Press the clasp.
3
C h a p t e r 4 I n s t a l l i n g H a r d wa r e a n d W i r i n g
a
b
1
2
DIN rail
4 - 11