Delta AH500 Hardware Operation Manual page 613

A H 5 0 0 H a r d w a r e a n d O p e r a t i o n M a n u a l
Error
code
The setting of the communication type of COM1 is
16#0035
incorrect. (SM9)
The communication setting of COM2 is incorrect.
16#0038
(SM9)
The setting of the station address of COM2 is incorrect.
16#0039
(SM9)
The setting of the communication type of COM2 is
16#003A
incorrect. (SM9)
The memories in the latched special auxiliary relays
16#0050
are abnormal.
16#0051 The latched special data registers are abnormal.
The memories in the latched auxiliary relays are
16#0052
abnormal.
16#0053 The latched timers are abnormal.
16#0054 The latched counters are abnormal.
16#0055 The latched 32-bit counters are abnormal.
16#0056 The memories in the latched timers are abnormal.
16#0057 The memories in the latched counters are abnormal.
The memories in the latched 32-bit counters are
16#0058
abnormal.
16#0059 The latched data registers are abnormal.
16#005A The latched working registers are abnormal.
16#005B Abnormal SFC parameters
The CPU module does not detect a memory card.
16#005D
(SM453）
16#005E The memory card is initialized incorrectly. (SM453)
The data is read from the inexistent file in the memory
16#005F card, or the data is written into the inexistent file in the
memory card. (SM453)
The default folder can not be created in the CPU
16#0060
module. (SM453)
The capacity of the memory card is not large enough.
16#0061
(SM453)
16#0062 The memory card is write protected. (SM453)
An error occurs when the data is written into the
16#0063
memory card. (SM453)
16#0064 The file in the memory card can not be read. (SM453)
16#0065 The file in the memory card is a read-only file. (SM453)
16#0066 An error occurs when the system is backupped.
The size of the PLC parameters restored exceeds the
16#0067
size of the PLC parameters of the CPU module.
16#0068 Corrupted symbol table
16#0069 Corrutped EIP parameters
16#1001 The PLC CPU cannot read/write data on the modules.
The mapped data between the PLC CPU and the
16#1003
modules is not right.
An error occurs when the data is accessed through the
16#1400
auxiliary processor. (SM9)
An error occurs when the data in the I/O module is
16#1401
accessed. (SM9)
1 2 - 6 4
Description
LED indicator status
CPU
Status
ERROR
FAULT
Continue Blinking
Continue Blinking
Continue Blinking
Continue Blinking
Continue ON
Continue ON
Continue ON
Continue ON
Continue ON
Continue ON
Continue ON
Continue ON
Continue ON
Continue ON
Continue ON
Continue ON
Continue Blinking
Continue Blinking
Continue Blinking
Continue Blinking
Continue Blinking
Continue Blinking
Continue Blinking
Continue Blinking
Continue Blinking
Continue Blinking
Continue Blinking
Stop Blinking
Stop Blinking
Continue Keep Blinking
Continue Keep Blinking
Stop Keep
Stop Keep
BUS
Keep
Keep
Keep
Keep
Keep
Keep
Keep
Keep
Keep
Keep
Keep
Keep
Keep
Keep
Keep
Keep
Keep
Keep
Keep
Keep
Keep
Keep
Keep
Keep
Keep
Keep
Keep
Keep
Keep
ON
ON