Delta AH500 Hardware Operation Manual page 315

A H 5 0 0 H a r d w a r e a n d O p e r a t i o n M a n u a l
(3) After the POU is added, a program editing window will appear in the main working area.
After the program editing window is opened, the corresponding toolbar will appear in the window. The
functions are described below.
Icon Keyboard shortcut
Typing an instruction
Typing an instruction
Typing an instruction
Typing an instruction
Typing an instruction
Typing an instruction
*. Please refer to section 6.5.3 for more information about typing an instruction.
6 - 1 0
Local symbol table
Program editing area
None
Switching to address mode
Displaying/Hiding the comments on the networks
Shift+Ctrl+C
None Displaying/Hiding the commands on the devices
Shift+Ctrl+A Activating/Inactivating the network selected
Adding a bookmark to the network selected or deleting a
Shift+Ctrl+B
bookmark from the network selected
Going to the previous bookmarked position
Shift+Ctrl+P
Going to the next bookmarked position
Shift+Ctrl+N
Putting a network above the network selected
Ctrl+I
Shift+Ctrl+I Putting a network under the network selected
ESC Selection
Inserting a contact
Inserting a coil
Inserting a comparison contact
Selecting a type of comparison contact
Inserting a block logic instruction
(NP/PN/INV/FB_NP/FB_PN)
Selecting a type of block logic instruction
(NP/PN/INV/FB_NP/FB_PN)
Inserting an instruction or a function block
Shift+Ctrl+U
Function