Delta AH500 Hardware Operation Manual page 318

(5) Click ??? above the contact, type a device address in the box, and press Enter on the keyboard to jump
to the next box in the network. After a device address is typed in the box, the users can press Esc on the
keyboard to complete the editing. In this example, X0.0 is typed in the box for the contact, and M0 is
typed in the box for the coil.
Additional remark
After users click a network and press Enter on the keyboard, they can edit a box. The users can edit the next
box in the network after they press Enter on the keyboard. Besides, the next network is selected after the
users press Tab on the keyboard. The users can edit a box with the keyboard. After the editing is complete,
the users can press Enter on the keyboard to jump to the next box. If the users want to end the editing, they
can press Esc on the keyboard.
If the users have declared symbols, and the address field is still in editing status, users can clear the device
editing field and the system automatically shows a dropdown list that is suitable for the symbol. Click
box, or press Page Down on the keyboard when they edit the box. The symbols on the drop-down list are the
symbols which can be assigned to the object. The users can select a symbol by the mouse or the up/down
key on the keyboard. Please refer to chapter 6 in ISPSoft User Manual for more information about symbols.
C h a p t e r 6 W r i t i n g a P r o g r a m
in a
6 - 1 3