Installing And Uninstalling Ispsoft - Delta AH500 Hardware Operation Manual

A H 5 0 0 H a r d w a r e a n d O p e r a t i o n M a n u a l
Before developing an AH500 Series system, install ISPSoft and COMMGR. ISPSoft is a software platform for
integrating the hardware, network configuration, and program development for a system. COMMGR functions as
middleware between a computer and devices. It functions as a communication management interface between
ISPSoft and AH500 Series hardware.

3.1 Installing and Uninstalling ISPSoft


System requirements
Item
Operating system
CPU
Memory
Hard disk drive
CD-ROM drive
Monitor
Keyboard/Mouse
Printer
RS-232 port
USB port
Ethernet port
Communication
software
Supported Models
*1. ISPSoft supports several ways to connect a computer to a PLC. Make sure the port and the mode supported by
the PLC are correct before you connect a computer to the PLC.
*2. Please refer to section 3.2 for more information about COMMGR.
*3. The functions and specifications mentioned above are only applicable to ISPSoft version 3.00 or above. The older
versions are not equipped with complete functions.
3 - 2
Windows XP / 7 / 8 / 10
Pentium 1.5 G or above
256 MB or above (512 MB or above is recommended.)
Capacity : 500 MB or above
This is optional for installing ISPSoft.
Resolution: 800×600 or above
(suggested setting: 1024x768/96 dpi)
A general keyboard/mouse or devices compatible with Windows
A printer with a driver for Windows. This is needed to print projects.
For connecting to a PLC
For connecting to a PLC
For connecting to a PLC
COMMGR, a communication manager, must be installed. (*2)
AH500 series PLCs/DVP series PLCs (exclusive of DVP-PM series PLCs)/ AS series, AC
motor drives: VFD with PLC built-in series, and Text panel HMI with PLC built-in series.
System requirement
One of them is used, but a PLC that is
connected must have a corresponding port. (*1)