Delta AH500 Hardware Operation Manual page 559

A H 5 0 0 H a r d w a r e a n d O p e r a t i o n M a n u a l
Error
Description
code
The value exceeds the range of
values which can be represented
16#2013
by the floating-point numbers.
(SM0/SM5)
The task designated by
16#2014 TKON/TKOFF is incorrect, or
exceeds the range. (SM5)
There are more than 32 levels of
16#2015 nested program structures
supported by CALL. (SM0)
There are more than 32 levels of
nested program structures
16#2016
supported by FOR/NEXT.
(SM0/SM5)
The number of times FOR is
16#2017 used is different from the number
of times NEXT is used. (SM5)
There is a label after FEND, but
there is no SRET.
16#2018
There is SRET, but there is no
label. (SM5)
The interrupt task is not after
16#2019
FEND. (SM5)
IRET/SRET is not after FEND.
16#201A
(SM5)
There is an interrupt task, but
there is no IRET.
16#201B
There is IRET, but there is not
interrupt task. (SM5)
End is not at the end of the
16#201C
program. (SM5)
There is CALL, but there is no
16#201D
MAR. (SM5)
The function code used in
16#201E MODRW is incorrect.
(SM102/SM103)
The length of the data set in
16#201F MODRW is incorrect.
(SM102/SM103)
The communication command
16#2020 received by using MODRW is
incorrect. (SM102/SM103)
1 2 - 1 0
Remedy
Check the program, compile the program again, and
download the program again.
Check the program, compile the program again, and
download the program again.
Check the program, compile the program again, and
download the program again.
Check the program, compile the program again, and
download the program again.
Check the program, compile the program again, and
download the program again.
1. Compile the program again, and download the program
again.
2. Reinstall ISPSoft, compile the program again, and
download the program again.
1. Compile the program again, and download the program
again.
2. Reinstall ISPSoft, compile the program again, and
download the program again.
1. Compile the program again, and download the program
again.
2. Reinstall ISPSoft, compile the program again, and
download the program again.
1. Compile the program again, and download the program
again.
2. Reinstall ISPSoft, compile the program again, and
download the program again.
1. Compile the program again, and download the program
again.
2. Reinstall ISPSoft, compile the program again, and
download the program again.
1. Compile the program again, and download the program
again.
2. Reinstall ISPSoft, compile the program again, and
download the program again.
Check the usage of the instruction and the setting of the
operands. Please refer to the explanation of the
instruction MODRW in AH500 Programming Manual for
more information.
Check the usage of the instruction and the setting of the
operands. Please refer to the explanation of the
instruction MODRW in AH500 Programming Manual for
more information.
Check whether the slave supports the function code and
the specified operation.