Delta AH500 Hardware Operation Manual page 512

Users can manage the items in the table by using the function buttons on the top.
Button
Move Up Moving the item selected in the table upwards
Move Down Moving the item selected in the table downwards
Delete Deleting the item selected in the table
Copying the item selected in the table, and automatically adding the item which is copied to
Copy
the bottom of the table
After the users create a data exchange table, they can select a mode in the Mode drop-down list box.
Mode
Program The execution of the data exchange is enabled or disabled by means of setting flags*
Control flags are set to ON, the execution of the data exchange will be enabled.
PLC Run When the PLC runs, the data exchange is executed.
Always Enable The data exchange is executed whether the PLC runs or stops.
*1. The mode selected will be executed only if the Enable checkbox in the window used to set an item is selected.
*2. Please refer to section 11.3.3 for more information about setting flags.
C h a p t e r 11 C o n v e n i e n t F u n c t i o n s
Description
Description
2
. If the
11 - 6 3