Delta AH500 Hardware Operation Manual page 367

Hide thumbs Also See for AH500:

8.1.2.2 Replacing the Module

The following steps show you how to replace the module.

Select and right-click the module for replacement in Hardware Configuration area or from CPU Group

Information section.

Choose Replace on the context menu. After that you can see two different types of replacements for

selection, Same Type and All Type.

Replace only the selected module with the same type module. The new module Input/Output

Device Range will be the same, while other parameters may return to system defaults if they cannot

Replace selected module to be any type of module. The result is similar to deleting the original

module by adding a new one, so the new module Input/Output Device Range will be re-configured

and other parameter settings will also return to system defaults.

Once the replace type is selected, the Module Selection window appears with modules available for the

selected replace type. Double click or select the module you want to replace with and click OK.

C h a p t e r 8 H a r d w a r e C o n f i g u r a t i o n

Chapters