Delta AH500 Hardware Operation Manual page 410

(4) Select a driver in the Driver Name drop-down list box. If the users want to download parameters to a
single device, upload parameters from a single device, or monitor a single device, they have to select a
driver which can connect to the device specified. If the users want to download parameters to multiple
devices, upload parameters from multiple devices, or monitor multiple devices, the connection type that
the driver selected uses must be Ethernet. The users have to make sure that the driver selected is not in
the ERROR state.
(5) The users have to make sure that the routing tables produced are downloaded to nodes in the networks
before they use routing. If the users want to use routing, they have to select the Routing Mode checkbox,
and select a device in the First Station drop-down list box. Generally speaking, the device which actually
connects to the computer is the first station. If the computer connects to several devices, or connect to
devices through Ethernet, the users have to designate a device as the first station according to the
network framework created in NWCONFIG. Besides, if the Routing Mode checkbox is selected, the
driver selected in the Driver Name drop-down list box must be a driver which can connect to the first
station.
C h a p t e r 9 N e t w o r k C o n f i g u r a t i o n
9 - 7