Delta AH500 Hardware Operation Manual page 561

A H 5 0 0 H a r d w a r e a n d O p e r a t i o n M a n u a l
Error
Description
code
Illegal netmask address
16#6002
(SM1107)
16#6003 Illegal gateway mask (SM1107)
The IP address filter is set
16#6004
incorrectly. (SM1108)
The static ARP table is set
16#6006
incorrectly. (SM1108)
The NTP client service is set
16#6007
incorrectly. (SM1380）
16#6008 Illegal network number (SM1107)
16#6009 Illegal node number (SM1107)
The maximum MODBUS TCP
16#600F
connection is reached. (SM1089)
16#6012 Duplicated IP address (SM1107)
The trigger in the email is set
16#6101
incorrectly. (SM1112)
The interval of sending the email
16#6102
is set incorrectly. (SM1112)
The device containing the data
specified as the attachment
16#6103
exceeds the device range.
(SM1112)
The SMTP server address is
16#6106
incorrect. (SM1112)
SMTP authentication error
16#6108
(SM1112)
The SMTP server needs to be
16#6110
authenticated. (SM1112)
The specified email address does
16#6111
not exist. (SM1112)
The remote IP address set in the
16#6200 TCP socket function is illegal.
(SM1196)
The remote IP address set in the
16#6209 UDP socket function is illegal.
(SM1196)
Only auxiliary relays, data
16#6300 registers, and link registers can
be used in the Ether Link.
1 2 - 1 2
Remedy
1. Check the program and the related special data
registers.
2. Set the Ethernet parameter for the CPU module in
HWCONFIG again.
1. Check the program and the related special data
registers.
2. Set the Ethernet parameter for the CPU module in
HWCONFIG again.
Set the Ethernet parameter for the CPU module in
HWCONFIG again.
Set the Ethernet parameter for the CPU module in
HWCONFIG again.
Check the setting of the NTP client service, and download
it again.
Check the network configuration in NWCONFIG, and
download it again.
Check the network configuration in NWCONFIG, and
download it again.
Check the number of MODBUS TCP connections to see if
the number of the current total connections exceeds the
maximum number of MODBUS TCP connections.
Modify the IP address and download it again.
Set the Ethernet parameter for the CPU module in
HWCONFIG again.
Set the Ethernet parameter for the CPU module in
HWCONFIG again.
Set the Ethernet parameter for the CPU module in
HWCONFIG again.
Make sure that the address is correct, and set the
Ethernet parameter for the CPU module in HWCONFIG
again.
Check the user name, and the password. Set the
Ethernet parameter for the CPU module in HWCONFIG
again.
Check the user name, and the password. Set the
Ethernet parameter for the CPU module in HWCONFIG
again.
1. Check whether the email address is correct.
2. Set the Ethernet parameter for the CPU module in
HWCONFIG again.
1. Check the program and the related special data
registers.
2. Set the Ethernet parameter for the CPU module in
HWCONFIG again.
1. Check the program and the related special data
registers.
2. Set the Ethernet parameter for the CPU module in
HWCONFIG again.
Check the setting of the Ether Link in NWCONFIG, and
download it again.