Delta AH500 Hardware Operation Manual page 52

Number Name
10 Locating hole

Profile of the redundant main backplane AHBP04MR1-5A
2 2
1 1
6
7
Number Name
1 Mounting hole
2 Extension port 1
3 Extension port 2
4 Connector
5 Connector
6 Mounting hole
7 Hole
8 Mounting clip
9 Mounting hole
10 Locating hole
C h a p t e r 2 S p e c i f i c a t i o n s a n d S y s t e m C o n f i g u r a t i o n
A mounting clip is pressed into these locating holes.
3 4
8 9 1 0
Fixing the backplane
It is connected to a superior backplane.
It is connected to an inferior backplane.
Connecting the backplane and a power supply module
Connecting the backplane and an input/output module
After a module is installed, it is fixed by a screw.
The projection under a module is inserted into this hole.
Hanging a backplane on a DIN rail
After a mounting clip is installed, it is fixed by screws.
A mounting clip is pressed into these locating holes.
Description
5 1
9
Description
2 - 1 9