Delta AH500 Hardware Operation Manual page 466

After the users select a small picture, and right-click the small picture, they can click Write Register or
Read Register on the context menu.

Write Register: The data written into the slave station specified is stored in registers in the master
station. For example, D3100~D3149 in the figure below are write registers.

Read Register: The data read from the slave station specified is stored in registers in the master
station. For example, D3000~D3099 in the figure below are read registers.
After the users click Write Register or Read Register on the context menu, a correponding register
monitoring table will appear.
A data format can be selected.
C h a p t e r 11 C o n v e n i e n t F u n c t i o n s
11 - 1 7