Delta AH500 Hardware Operation Manual page 387

Hide thumbs Also See for AH500:

8.1.3.7 Ethernet – Advance: NTP

Select the NTP Client Function Enable checkbox, and then set the related parameters to enable the function

of synchronizing the real-time clock in the CPU module to an NTP server, and carry out the related setting.

NTP Client Function Enable: Select this option to enable this function.

Update Cycle: Users can set the IP address of an NTP server. The CPU module corrects the time inside

itself by connecting to the server periodically. Users can set an interval of correcting the

time in the CPU module. If the interval is thirty minutes, the CPU module will connect to

the NTP server every thirty minutes.

Daylight Saving Enable: Select this option to enable this function.

After Daylight Saving Enable is selected, you can set the start and end of month, date and time of the

daylight saving.

Users can select a time zone in the Time Zone drop-down list box for the NTP.

C h a p t e r 8 H a r d w a r e C o n f i g u r a t i o n

Chapters