Delta AH500 Hardware Operation Manual page 320

C h a p t e r 6 W r i t i n g a P r o g r a m
(3) Type the IL instruction "OUT Y0.0", and write the program shown below.
Additional remark
A contact and a coil can be created by typing simple instructions. Please refer to the description below. (The
instructions typed are case-insensitive.)
 Inserting a normally-open contact (contact A): "A Device address"
 Inserting a normally-closed contact (contact B): "B Device address"
 Inserting an output coil (OUT): "O Device address"
6 - 1 5