Delta AH500 Hardware Operation Manual page 340

C h a p t e r 6 W r i t i n g a P r o g r a m
After the item is double-clicked, a window will appear. The users can add items which will be monitored to the
window. If the users want to add an item to the window, they have to double-click the blank in the monitoring
table, or type a device name directly, and type a start address and the number of devices which will be
monitored in the Device Monitor Input window. Please notice that 100 items at most can be added to a
monitoring table.
The users can press Insert on the keyboard to switch between inserting an item in the monitoring table and
replacing an item in the monitoring table. The mode which is selected is displayed in the status bar in ISPSoft.
If the insertion mode is selected, the item added will be above the item selected in the monitoring table. If the
replacement mode is selected, the item added will overwrite the item selected in the monitoring table.
If the users want to hide certain columns in the monitoring table, they can right-click the monitoring table, point
to Set the Fields, and unselect certain items. After an item is unselected, the corresponding column will
disappear.
6 - 3 5