Delta AH500 Hardware Operation Manual page 51

A H 5 0 0 H a r d w a r e a n d O p e r a t i o n M a n u a l
Number Name
1 Mounting hole
2 Extension port
3 Mounting hole
4 Connector
5 Connector
6 Connector
7 Hole
8 Mounting clip
9 Mounting hole
10 Locating hole

Profile of the extension backplane AHBP08E1-5A
2 4
1
9
Number Name
1 Mounting hole
2 Extension port 1
3 Extension port 2
4 Connector
5 Connector
6 Mounting hole
7 Hole
8 Mounting clip
9 Mounting hole
2 - 1 8
Fixing the backplane
It is connected to an inferior backplane.
After a module is installed, it is fixed by a screw.
Connecting the backplane and a power supply module
Connecting the backplane and a CPU module
Connecting the backplane and an input/output module
The projection under a module is inserted into this hole.
Hanging a backplane on a DIN rail
After a mounting clip is installed, it is fixed by screws.
A mounting clip is pressed into these locating holes.
5 6
7
3
8
10
Fixing the backplane
It is connected to a superior backplane.
It is connected to an inferior backplane.
Connecting the backplane and a power supply module
Connecting the backplane and an input/output module
After a module is installed, it is fixed by a screw.
The projection under a module is inserted into this hole.
Hanging a backplane on a DIN rail
After a mounting clip is installed, it is fixed by screws.
Description
8
Description
1