Delta AH500 Hardware Operation Manual page 417

A H 5 0 0 H a r d w a r e a n d O p e r a t i o n M a n u a l
configuration in NWCONFIG. Besides, the users can directly connect network modules to the DVP series
PLCs in the NWCONFIG window.
There are two ways to add a network module to the working area.

Method 1
Select a network module on the device list, and then drag it to a PLC in the working area.
If the PLC does not support the network module selected, the mouse cursor becomes
An AH10EN series module can only be put on a main backplane. Eight AH10EN series modules at most
can be put on a main backplane. An AH10SCM series module can be put on an extension backplane. The
number of AH10SCM series modules which can be put on a backplane depends on the number of slots on
the backplane.
Users can choose a backplane to which an AH10SCM series module is dragged.
After the users drag an AH10SCM series module to
be added to the node.
9 - 1 4
at the right side of a node, an extension rack will
.