Delta AH500 Hardware Operation Manual page 101

A H 5 0 0 H a r d w a r e a n d O p e r a t i o n M a n u a l
AH15EN-5A network protocol supported
Communication
protocol
Electrical specifications
Item
Supply voltage
Electronical
isolation
Weight

AH10DNET-5A
AH500 series CPU modules which are supported
Item
Model name
DeviceNet interface
Item
Transmission
method
Electrical isolation
Connector
Communication
cable
Voltage
DeviceNet Communication
Item
Message type
Transmission speed
Weight

AH10PFBM-5A
AH500 series CPU module supported
Item
Model name
PROFIBUS-DP interface
Item
Interface
Transmission
method
Transmission cable
PROFIBUS-DP communication
Item
Message type
Module name
2 - 6 8
ICMP, IP, TCP, UDP, DHCP, NTP, Modbus TCP, SNMP, SMTP, and IEC60870-
5-104
5 VDC
1500 VAC
139 g
AH500 series PLCs
CAN
500 VAC
Removable connector (5.08 mm)
The Delta standard cables UC-DN01Z-01A and UC-DN01Z-02A are
recommended.
The communication cable should be away from the power cable and the
shielded cable should be connected to the ground.
DeviceNet network provides 11~25 V direct current. e.g. 28 mA (Typical value),
125 mA impulse current (24 VDC).
Master mode: Supporting explicit messages, and all kinds of I/O connections
with the slave such as I/O polled connections, bit-strobed
connections, state changing connections, and cyclic connections
Slave mode: Supporting explicit messages and a group 2 only server
Standard: 125 kbps, 250 kbps and 500 kbps
Extension: 10 kbps, 20 kbps, 50 kbps, 125 kbps, 250 kbps, 500 kbps, 800 kbps
and 1 Mbps
135g
AH500 series PLCs
DB9 connector
High-speed RS-485
Two-wire twisted shielded cable
Cyclic data exchange
AH10PFBM-5A
Specifications
Specifications
Specifications
Specifications
Specifications
Specifications
Specifications